The SITRANS F M MAG 5100 W with its patented liners of hard rubber NBR or ebonite and EPDM is a sensor for all water applications such as ground water, drinking water, cooling water, waste water, sewage or sludge applications.
Application examples: Water abstraction, Water distribution network, Waste water and as custody transfer water meter or cooling meter.
Benefits
Short lead time
Rugged NBR hard rubber liner for all water and wastewater applications
EPDM liner specifically for drinking water applications requiring special approvals
Ebonite liner for drinking water, water and wastewater applications
Increased low flow accuracy for water leakage detection (NBR or EPDM liner)
Suitable for direct burial and constant flooding (IP68)
Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprint
Detail
Meassuring range
0 to 10 m/s
Nominal Sizes
From DN 15 to DN 2000 (1" to 78")
Accuracy
0.2 % ±2.5 mm/s
Operating Pressure
Max. 16 bar (Max. 150 psi)
Ambient temperature
From -40 to 70 °C (-40 to 158 °F)
Medium Tempreature
From -10 to 70 °C (14 to 158 °F)
Liners
EPDM NBR hard rubber Ebonite hard rubber
Electrodes
Hastelloy C-276 Built-in grounding electrodes
Material
Carbon steel, with corrosion resistant two-component epoxy coating
Drinking Water Approvals
EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS
Custody Transfer Approvals
OILM R 49 MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria)
